Kids Owlette. Bars 116, 122 and 128.

Children's pattern. PJ Mask Owlette. A shirt, skirt and wings.

You can enter your measurements in three ways

1. Enter your measurements in the table below.
2. Select your clothing size.
3. After selecting your clothing size, you can adjust your measurements. This is useful if you have longer arms or legs, for example.

Receiving your pattern

You can receive your pattern in A0 or A4 format.

A4 format

If you want to print the pattern at home on a regular printer, choose A4. You will receive the pattern as a PDF file directly in your email.
Print the A4 pattern at actual size and without margins. The control line must measure exactly 5 centimeters.

A0 format

If you choose A0 format, you will receive the pattern as a PDF file directly in your email.
You can also have me print the pattern on A0 paper and ship it to you.
Shipping to the Netherlands costs €6.49. Shipping to Belgium and Germany costs €8.50.

Owlette

A. front piece
B. back piece
C. skirt
D. sleeve
E. cape
F. logo Owlette
G. ties arms cape

Needed: Approximately 100 cm of Tricot for the skirt and shirt. The cape is best made in a non-knitted fabric, due to... curl, you need 50 cm of this. Fabric for the patterns in the cape. Fabric for the logo. Thin elastic, nonwoven, adhesive nonwoven, elastic 2 cm wide.

1. Place patterns A, B, C, E and F against the fabric fold.
Cut out pattern (F) without seam. Cut out all other seam patterns.
2. Stick the logo on the front piece with adhesive interfacing, and iron interfacing on the inside of the front piece.
3. Stitch the logo onto the front with a zigzag stitch.
4. Stitch the shoulder seams and side seams of the front piece to the back piece.
5. Stitch the sleeves together. Now pin the sleeves to the armholes, making sure the fabric is evenly distributed.
6. Sew the sleeves into the armholes.
7. Hem the sleeves, bottom and neckline.

8. Fold the skirt in half and stitch it in place widthwise.
9. Now fold a tunnel at the top of the skirt and stitch it in place. Leave 3 cm open, you will need this to thread the elastic through.
10. Thread elastic through the tunnel and stitch it in place. Now stitch the tunnel shut.
11. Hem the bottom of the skirt.

12. Fold the bracelets of the cape in half and topstitch them.
13. Thread elastic through the bands and stitch the elastic in place.
14. Place the cape pattern pieces over the openings in the cape fabric. Pin and stitch these together with a zigzag stitch.
15. Use a rolled hem to finish the outer edges of the cape.
16. Fold the ends of the cape around the bracelets and sew them in place.
17. You can attach the cape to the shirt using: safety pins. You can also choose to sew Velcro onto the shoulders.