Cargo

Cargo trousers with side pockets.

You can enter your measurements in three ways

1. You can enter your measurements in the table below.
2. You can select your clothing size.
3. You can adjust your measurements after choosing your clothing size. This is useful if, for example, you have extra long arms or legs.

Receive your pattern
You can receive your pattern in AO or A4 format.

A4 size.

If you want to print the pattern yourself at home on a regular printer, choose A4. You will then receive the pattern as a PDF file directly in your email.
Print the A4 pattern full size and without margins. Please note: if you print your pattern on A4 size, the control line must be exactly 5 centimeters long.

A0 format.

If you choose an AO format, you will receive the pattern directly as a PDF file in your email.
You can also have me print the pattern in A0 size on A0 paper and have it sent. There will be no additional costs for printing, but there will be shipping costs. Shipping to the Netherlands costs €4.70. Shipping to Belgium costs €5.99.

Cargo

A . Front
B. Back piece
C . Waistband
D . Trouser cuffs
E . Bag
F . Bag
G . Bag
H . Bag

Needed: A stretchy fabric. Elastic 3 cm wide, cord, interfacing, nesting rings.

1. Cut out the pattern in paper.
2. Fold the fabric in half lengthwise.
3. Place the pattern C against the fabric fold.
Place the other patterns on the fabric and cut out all the patterns with seams.
4. Place pocket part E and the front piece on top of each other and stitch the pocket at the pocket entrance. Now turn the fabric over, with the wrong sides facing each other. Topstitch the pocket.
5. Now place the bags (F) against the bags (E). Sew the pockets closed.
6. Now place the front piece against the back piece. Sew the outer leg seam of the trousers and then sew through.
7. Iron interfacing onto the pockets (G and H). Iron and sew the top seam of pocket (H).
8. Iron the seams of the pockets, pin and baste the pockets. Now sew the pockets onto the trousers.
9. Place the front piece on the back piece, now stitch the inside leg seam.
10.Now place the legs on top of each other and pin the crotch seam in place. Now sew the crotch seam.
11. Iron interfacing on the waistband where the nesting rings will be placed, and insert the nesting rings.
12. Fold the waistband (C) together and stitch it in place widthwise.
13. Fold the waistband in half. Place it against the waist of the pants. And Sew the waist. Leave 5 cm open, you will need this to thread the elastic through.
14. Fold the trouser leg edges together and stitch them in place across the width.
15. Fold the trouser leg cuffs in half and stitch them to the legs. Leave 5 cm open.
16. Pin the elastic to a safety pin and thread the elastic through the cuffs. Sew the elastic in place.
17. Pull the cord through the waistband. Sew the last 5 centimeters closed.