Flowerbomb


Simple jacket.



You can enter your measurements in three ways


1. You can enter your measurements in the table below.
2. You can select your clothing size.
3. You can adjust your measurements after choosing your clothing size. This is useful if, for example, you have extra long arms or legs.

Receive your pattern
You can receive your pattern in AO or A4 format.

A4 size.


If you want to print the pattern yourself at home on a regular printer, choose A4. You will then receive the pattern as a PDF file directly in your email.
Print the A4 pattern full size and without margins. Please note: if you print your pattern on A4 size, the control line must be exactly 5 centimeters long.

A0 format.


If you choose an AO format, you will receive the pattern directly as a PDF file in your email.
You can also have me print the pattern in A0 size on A0 paper and have it sent. There will be no additional costs for printing, but there will be shipping costs. Shipping to the Netherlands costs €4.70. Shipping to Belgium costs €5.99.
















                                     


Flowerbomb


A. front piece
B. back piece
C. sleeve
D. sleeve
E. sleeve cuff
F. collar
G. hip collar
H. facing back piece
I. facing front piece
A. front piece
B. back piece
C. sleeve
D. sleeve
E. sleeve cuff
F. collar
G. hip collar
H. facing back piece
I. facing front piece
Needed: approximately 140 centimeters of fabric, depending on your measurements. Cuff fabric, divisible zipper

1. Fold the fabric in half lengthwise.
2. Place patterns B, F, G and H against the fabric fold.
    Place the other one on the fabric and cut out the patterns (A, B, C, D, H and I) with seam.
3. Cut out the other patterns (E, F and G) from cuff fabric.
4. Stitch the shoulder seams of the front and back pieces with the right sides together.
5. Stitch the two sleeve parts (C and D) together and topstitch.
6. Stitch the sleeves to the shoulders.
7. Pin the seam of the sleeves and body. Stitch the seam of the body and sleeves together in one go.
8. Fold the sleeve cuffs in half and stitch them to the sleeves.
9. Fold the hip edge in half and stitch it to the bottom of the body.
10. Fold the collar in half and pin it to the body, stretching the rib fabric slightly while pinning.
11. Stitch the neckline to the body.
12. Place the zipper upside down on the front pieces, baste and stitch it in place.
13. Stitch the facing pieces (H and I) together.
14. Place the facing upside down against the body and stitch it in place.
15. Fold the seam of the facing, towards the facing, and topstitch it.
16. Finish the outside of the facing and hand-stitch the facing to the hip edge.
Terms and conditions

Privacy policy
Connect