Pants Manon

Tight-fitting trousers with panels on the legs.

You can enter your measurements in three ways

1. You can enter your measurements in the table below.
2. You can select your clothing size.
3. You can adjust your measurements after choosing your clothing size. This is useful if, for example, you have extra long arms or legs.

Receive your pattern
You can receive your pattern in AO or A4 format.

A4 size.

If you want to print the pattern yourself at home on a regular printer, choose A4. You will then receive the pattern as a PDF file directly in your email.
Print the A4 pattern full size and without margins. Please note: if you print your pattern on A4 size, the control line must be exactly 5 centimeters long.

A0 format.

If you choose an AO format, you will receive the pattern directly as a PDF file in your email.
You can also have me print the pattern in A0 size on A0 paper and have it sent. There will be no additional costs for printing, but there will be shipping costs. Shipping to the Netherlands costs €4.70. Shipping to Belgium costs €5.99.

Pants Manon

A: Front piece
B: Back piece
C : Waistband
D : Trouser cuffs
E: Bag
F: Bag
G: Back piece
H: Back piece

A : Front piece
B: Back piece
C : Waistband
D : Trouser cuffs
E: Bag
F: Bag
G: Back piece
H: Back piece

Needed: approximately 1 meter of jogging fabric. Elastic 7 cm wide, cord, interfacing, nesting rings.

1. Place pocket part E and the front piece together with the right sides and sew the pocket onto the pocket entrance. Topstitch the bag.
2. Stitch the back piece together. Do this by first attaching G to H and stitching.
3. Now attach the piece GH to B and topstitch it as well.
4. Now place bag (F) against bag (E). Stitch the pockets together.
5. Now place the front piece against the back piece. Sew the outer seam of the trousers and then topstitch them.
6. Place the front piece on top of the back piece again, and now stitch the inside leg seam.
7. You now have 2 pipes. Now place the legs on top of each other and pin the crotch seam in place. Now sew the crotch seam down and through.
8. Fold the waistband (C) and stitch it in place widthwise.
9. Also do this with the trouser leg cuffs.
10. Iron interfacing on the waistband where the nesting rings will be placed, and insert the nesting rings.
11. Fold the waistband in half. And place it against the waist of the pants. And Sew the waist. Leave 5 cm open, you will need this to thread the elastic through.
12. Fold the pant leg cuffs in half. And place it against the legs of the pants. And sew the trouser legs. Leave 5 cm open, you will need this to thread the elastic through.
13. Pin the elastic to a safety pin and thread the elastic through the cuffs. Sew the elastic in place.
14. Thread the cord through the waistband. Sew the last 5 centimeters closed.