Autumn

A wide-fitting sweater with a boat neck.

You can enter your measurements in three ways

1. You can enter your measurements in the table below.
2. You can select your clothing size.
3. You can adjust your measurements after choosing your clothing size. This is useful if, for example, you have extra long arms or legs.

Receive your pattern
You can receive your pattern in AO or A4 format.

A4 size.

If you want to print the pattern yourself at home on a regular printer, choose A4. You will then receive the pattern as a PDF file directly in your email.
Print the A4 pattern full size and without margins. Please note: if you print your pattern on A4 size, the control line must be exactly 5 centimeters long.

A0 format.

If you choose an AO format, you will receive the pattern directly as a PDF file in your email.
You can also have me print the pattern in A0 size on A0 paper and have it sent. There will be no additional costs for printing, but there will be shipping costs. Shipping to the Netherlands costs €4.70. Shipping to Belgium costs €5.99.

Autumn

A. front piece
B. back piece
C. sleeve
D. Sleeve cuff
E. facing front piece
F. siege back piece

A. A. front piece
B. back piece
C. sleeve
D. Sleeve cuff;br: E. facing front piece
F. siege back piece

Needed: approximately 140 centimeters of fabric, depending on your measurements.

1. Cut out the pattern in paper.
2. Fold the fabric in half lengthwise.
3. Place patterns A, B, E and F against the fabric fold.
Place patterns C and D on the fabric and cut out all patterns with seam.
4. Stitch the shoulder seams of the front and back pieces with the right sides together.
5. Stitch the front piece facing (E) and the back piece facing (F) together.
6. Stitch the sleeves to the front and back.
7. Pin the seam of the sleeves and body. Stitch the seam of the body and sleeves together in one go.
8. Stitch the facing to the neck.
9. Fold the seam of the facing, towards the facing, and topstitch it.
10. Topstitch the neck facing.
11. Stitch the sleeve cuffs in place across the width.
12. Fold the sleeve cuffs in half and stitch them to the sleeves.
13. Iron interfacing to the back of the fabric where the nesting rings will be.
14. Place the nesting rings in the fabric.
15. Sew the tunnel closed and thread a cord through the tunnel.